evo, a imaju i opciju da se nakaci i solarni paneli pa da rade zajedno
The TPW Series Wind Turbines from Tycon Power Systems are lightweight at less than 10.5kg and are designed for ease of installation and long service life. The generator is a very low cogging force design for better performance in light winds and is packaged in a fully sealed die cast anodized aluminum enclosure. There are no brushes to wear out or cause electrical noise and the bearings are sealed so the system is maintenance free. The blades are glass reinforced nylon for high strength, UV resistance and fatigue resistance. The turbines are available in 12V and 24V versions.
The blade diameter of the 400W is 1.12 meter. The 6 blade design offers better performance in light winds and reduced vibration when spinning at speed.
The TPW series wind turbines have automatic overspeed protection to prevent damage in high winds. The blade assembly is removeable as 1 piece for hurricane protection and ease of assembly.
The permanent magnets used are Neodymium Iron Boron (NdFeB) for higher power output.
Mounting is to the top of a 41mm (1.6”) ID standard pole. The hardware used is stainless steel for corrosion protection.
Now includes a battery charging controller to prevent battery over-charge and over-discharge. Controller can be used in conjunction with a solar controller to create a hybrid power system.
HAWT Turbine Product Features
Very low startup wind speed of 2.1m/s
Ultra smooth and quiet running
Sealed aluminum extrusion housing for
protection in harsh environments
Very light and compact design
Easy Installation and maintenance free
Automatic Electronic Over-speed
Rated for up to 40 m/s (90mph) wind speed
Short Circuit, Reverse Current protected
Disconnects load at 11.1V. Auto
reconnect at 12.5V
Rated for 20A input or load current.
LED indicators: Load Status, Charging
and fully charged.
-40°C to +65° C Operation